The upper, BCG and the charging handle are from PSA. BCG is NiB coated. The barrel is 8.5”. I have yet to paint the Lower. Any recommendations on what to use for painting the Lower?
AR15 Pistol build project from 80% Lower.
Who's James
-
Is that a 80% lower?
-
Yes. Bought with my co-worker and milled it with his tools.
-
did you mill the lower yourself?
-
Yes. I had to use my friend's tools and jig.
-
Most people hesitate investing money on Jig and tools. it cost much more than ar lower.
you should take pics and record making process.
anyway, it is good to try making first ar lower from scratch.
Nice. !! -
Exactly, if my friend didn’t have the tools and a jig, I wouldn’t have done it!
-
Awesome.. Wish i have the milling machine at my house too..!
-
I wish I had his set up too. Most important part is to have a jig which makes it much easier to machine the receiver. You can even use regular drill press to mill it if you have the jig.
-
Very interesting... So... is an 80% lower a free way to SBR?
-
With any 80%, you can use it as either rifle or pistol but you can't use it for SBR. If you intent to use any firearm for SBR, you must get a tax stamp from the feds which means you have to assign a serial number to your finished 80% receiver and register it.
-
?
80% 로워 를 하는 이유가 먼가요?
지그 와 툴 비용 에 어설프 게 작업 하면 완제품 만 못하는것 같던데요. -
그냥 만드는 맛이겠죠. 비용으로 따지자면 사는게 훨씬 저렴하잖아요.
벤드에이드님이 차를 두대사서 하나로 만들려고했던 마음이랄까... ㅋㅋㅋ -
?
그렇군요!
그리고 차 이야기 는 지금 생각 하면 참 미련한 짓 이라고 생각 합니다.ㅋㅋ
앞으론 마무리 할수 있는 끈기 와 실력 없으면 안 해야 한다고 생각 합니다. -
Please, tell me more about your car project. I am not really a motor head but do my own repairs on my own vehicles on my spare time.
-
?
정확히 말 하면 한국 에서 JEEP XJ 두대 를 가지고 한대 를 만든건 아니고 두대 를 가지고 한대 에 쓸만한 부품을 옮기고 추가 로 부품도 구하고 페인트 칠 도 하고 작업을 했는데 결국 엔진 에 문제가 생겨 마무리 못 하고 두 대 를 이민 오기전 급하게 헐값에 처분 했습니다.
-
Oh ok. I probably would have done the same. I just put new rear coil springs and brake pads on my 2002 Chevy Trailblazer. Soon I have to replace brake rotors for both front and rear. I bought the front rotors and waiting on the rear rotors. I also ordered engine oil drain valve made by Fumoto to make oil change simpler. And for transmission oil, I use electric fluid pump to facilitate the oil change. Next time I will ask you if I have any car questions.
-
?
저도 전동 펌프 있는데요 하하
그리고 저보다 실력이 뛰어 나신것 같은데 제가 도움 드릴께 있을까 싶지만 질문 주시면 아는 만큼 성실히 답 해드릴께요.
가까이 살면 가서 도와 드리고 싶네요. -
Thank you for your kind words. I am sure we will meet up one of these days.
-
I wouldn’t have done it if my friend did not have the tools and the jig. It would be too cost prohibitive for me to go ahead with this project if it wasn’t my friend.
Guns Reviews Board
정회원이상 자유로운 글쓰기가 가능합니다. 이용규칙은 아래의 [게시판 이용규칙]을 따라주시기 바랍니다
-
권총 하나 추천 해 달라고 하면 무엇을 추천 하실 건가요?
-
시그 P226
-
( CCW 공개) 허접한 캐리 건 !
-
Zev Tech Custom 19 w/Trijicon RMR
-
Heckler & Koch SP5K
-
BERETTA PX4 스톰 반자동권총
-
p320 carry - xcarry grip module
-
토러스 945
-
Beretta 92 Elite LTT
-
저 대신 조지아 여행을 다녀온 제 HK USP 입니다^^
-
CZ Czechmate
-
FN Five-seveN FDE
-
(CCW 공개) 매일 들고 다니는 Concealed carry weapons 입니다.
-
CZ Orange Tactical Sport 9mm
-
RIA Tac Ultra FS HC TCM 9mm 리뷰
-
Foxtrot 9mm 5인치 구매했습니다.
-
초보입문기5 - 최종회
-
CZ총에 꽂혔습니다!
-
CZ 10C fde-review
-
IWI Uzi Pro 9mm Pistol 4.5" 1-20&1-25 W/psb Stabilizing Brace
-
Springfield Armory 1911 TRP™ .45ACP
-
GLOCK 19 X
-
오늘 실내사격 모임에 멤버님이 가지고 오신 피스톨입니다.
-
CZ총에 꽂혔습니다!!
-
AR15 Pistol build project from 80% Lower.
-
Beretta M9A3
-
2011 화기
-
시그 사우어 SIG SAUER P210A-9 Target 9mm 권총
-
Foxtrot Mike ar9
-
드뎌 총을 구입했습니다 walther PDP 5” 베럴 컴팩트
-
CZ 권총 득템기
-
RUGER LCP
-
JB Tactical JB1522 (22lr 전용 AR pistol)
-
그랜드 파워 라는 브랜드를 아시나요?
-
Beretta 92S
-
Sig Sauer P229 Legion 9mm Pistol
-
Kooman 님의 대단한 Glock 17 입니다.
-
Star BM 9mm Made in Spain Pistol
-
Kriss Vector 9MM and SIG SAUER MPX COPPERHEAD 9MM
-
파이어 스타 권총 리뷰
-
Sig P365 X Macro
-
AK 9mm Vityaz KP9
-
CZ BREN 805 권총
-
CZ총기
-
다산기공의 피스톨이라고 합니다.
-
토러스 리볼버 2인치
-
HK P2000SK 9mm 서브 컴팩 피스톨 소개드립니다.
-
AR Pistol Build.
-
Tactical 20/20 Stabilizer Kit for Glock Pistols
-
Glock Gen5 9mm w/ Streamlight